Merchandise Description
ZD High Precision 52mm ZDR Series Helical Equipment Planetary Speed Reducer for Equipment
Merchandise Description
ZDR series planetary gearbox has adopted helical gear design, so the meshing of gears can be smoother. This sequence has a double-supported and sealed framework, easier to put in for buyers. It is broadly employed in linear manipulators, packaging machinery, assembly traces and and so forth. The optimum backlash of the ZDR sequence is significantly less than 5 arc.min and the reduction ratio covers 3~81.
The Product Advantages of Planetary Gearbox:
1.Adaptable composition design, in line with various functioning circumstances.
two.Ring equipment processing technologies: Making use of interior equipment slotting equipment and hobbing device the precision of ring equipment following processing can achieve GB7.
3.Hardened gear secondary scraping engineering: secondary high-pace dry cutting of gear removes equipment deformation caused by warmth treatment method. Gear precision can get to GB6.
four.CZPT backlash screening.
How to Read through:
fifty two ZDR 20 ( ) (S) – 750 T1 ( )
a b c d e f g h
| a | Body Size | fifty two =52mm |
| b | Collection code:ZDR | Oblique tooth precision |
| c | Reduction Ratio | Single Stage: 3,4,5,6,7,8,9,ten Two Levels: 15,twenty,twenty five,35,forty five,81. |
| d | Backlash | Single Phase: 12arc.min Two Levels: 15arc.min |
| e | Input shaft variety | S:Total locking(Omission)(regardless no matter whether the motor with keyway can use it. But D Cut are unable to use) S1:Locking with locking ring(irrespective whether the motor with keyway can use it. But D Minimize cannot use) S2:Locking with keyway (enter shaft with important) K:With keyway A:0ther sort (you should contact with us) |
| f | Applicable servo motor electricity (W),You should contact us for distinct electrical power | |
| g | Please make contact with us for the mouting variety of the flang | |
| h | Please get in touch with us for the design of servo motor | |
Spesifications & Particulars
When enter pace is 3000rpm
| Merchandise NO. | Reduction Ratio | Motor | Output Shaft Speed (rpm) | Normal Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Inner Instant Ohnertia Of Enter Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
| 52ZDR | 3 | fifty | 1000 | .255 | .784 | 392 | 196 | .571 | 3.43 | 10.three |
| one hundred | .715 | two.06 | .571 | |||||||
| two hundred | one.47 | 4.fifty one | .one hundred thirty five | |||||||
| 400 | 3.43 | 10.3 | .145 | |||||||
| 5 | fifty | 600 | .510 | one.47 | 490 | 245 | .04 | 1.fifty seven | 4.70 | |
| a hundred | 1.eighteen | three.72 | .04 | one.fifty seven | 4.70 | |||||
| two hundred | 2.65 | eight.04 | .118 | two.84 | 8.fifty three | |||||
| 9 | 50 | 333 | .921 | two.seventy four | 588 | 294 | 0.035 | 2.35 | 7.twenty five | |
| a hundred | 2.25 | six.86 |
Note1) The minute of enter shaft conversion is only received from the reducer, so it does not consist of moment of inertia of the motor.
Note2) The max. enter velocity is 5000rpm. Usually established to 3000rpm or much less.
Note3) The permissble radial load is indicated on the heart of the output shaft.
Note4) All values are inside of the variety corresponding to helical equipment.
When enter speed is 3000rpm
| Item NO. | Reduction Ratio | Motor | Output Shaft Speed (rpm) | Standard Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Inner Moment Ohnertia Of Enter Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
| 52ZDR | 15 | 50 | 200 | 1.67 | five.00 | 784 | 392 | 0.035 | 4.02 | 12.two |
| one hundred | 3.72 | 11.4 | ||||||||
| 20 | 50 | 150 | two.21 | 6.63 | 804 | 402 | 0.034 | 5.00 | 15. | |
| one hundred | five.00 | 15. | ||||||||
| 25 | 50 | 120 | two.74 | eight.33 | 882 | 441 | 0.0325 | 4.02 | 12.2 | |
| one hundred | six.27 | 19. | 6.27 | 19. | ||||||
| 35 | 50 | 85 | 3.eighty four | 11.5 | 882 | 441 | 0.030 | 3.eighty four | 11.5 |
Note1) The second of enter shaft conversion is only acquired from the reducer, so it does not contain moment of inertia of the motor.
Note2) The max, input pace is 5000rpm. Typically set to 3000rpm or considerably less.
Note3) The permissble radial load is indicated on the center of the output shaft.
Note4) All values are in the selection corresponding to helical equipment.
When input pace is 2000rpm
| Item NO. | Reduction Ratio | Motor | Output Shaft Pace (rpm) | Common Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Interior Moment Ohnertia Of Input Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
| 52ZDR | 3 | fifty | 666 | .477 | one.forty three | 450 | 225 | .571 | 3.43 | 10.3 |
| a hundred | one.05 | 3.15 | .a hundred thirty five | |||||||
| two hundred | 2.48 | 7.45 | .one hundred forty five | |||||||
| 5 | 50 | 400 | .795 | two.39 | 560 | 280 | .040 | 1.fifty seven | 4.70 | |
| 100 | 1.fifty seven | four.70 | .118 | |||||||
| 9 | 50 | 222 | one.57 | four.72 | 670 | 335 | 0.035 | 2.35 | 7.twenty five | |
| 15 | fifty | 133 | 2.sixty two | seven.87 | 882 | 441 | 0.035 | 4.02 | 12.two | |
| 20 | 50 | 100 | 3.five | ten.5 | 910 | 455 | 0.034 | 5.00 | 15. | |
| 25 | fifty | 80 | four.37 | thirteen.1 | 882 | 441 | 0.0325 | 6.27 | 19. |
Note1) The moment of enter shaft conversion is only acquired from the reducer, so it does not consist of instant of inertia of the motor.
Note2) The permissble radial load is indicated on the center of the output shaft.
Note3) All values are inside of the selection corresponding to helical gear.
Dimensions (Unit: mm):
| Item NO. | Reduction Ratio | Motor | Whole Duration L | Output Shaft | Flange | |||||||||||||
| Panasonic- made MSMA |
Yaskawa-manufactured SGMASH SGMSH | Mitsubishi-created HC-KFS HC-RFS |
LR | S | Q | QM | QM | W×U | T | D | LB | LE | LA | LZ | X | |||
| 52ZDR | 3,5,nine | 50 | 99.five | 32 | 12 | 20 | 18 | M4(depth)twelve | 4×13.five | 4 | 52 | 50 | 3 | 60 | M5 | 12 | ||
| 15,twenty,twenty five,35 | fifty | 110 | ||||||||||||||||
| three,5,nine | one hundred | 99.5 | ||||||||||||||||
| 15,twenty,25 | a hundred | 110 | ||||||||||||||||
| 3,five | 200 | 104.five | ||||||||||||||||
| 3 | four hundred | 104.five | ||||||||||||||||
Note1) You should inquire to us if motor product just isn’t standard (Matching motor list). (The flange dimension may possibly be distinct if motor assension is diverse.)
Note2) Rotation of the output shaft is in the exact same route as that of motor enter.
Note3) All values are within the variety corresponding to helical gear.
System
Double assist system
one.The planetary equipment is positioned in the middle of the output shaft.
2.The output shaft bearing is placed at the two ends of the planetary gear.
3.Individual sunshine equipment and coupling.
Compact output shaft mechanism
It adopts the style of output shaft integrated technique, compact composition, substantial rigidity, and it can face up to big influence. Area the input coupling and the sun equipment at the centre of the output shaft to boost the concentricity of the factors, therefore successfully managing the gear clearance and enhancing the backlash of the complete gearbox.
Framework
Entire needle structure
The inner bearing of the planetary equipment adopts a total-needle layout, the inner gap is manufactured by a grinding process, the floor hardness is HRC60, and the cylindricity is considerably less than .003mm.
Ring gear framework
The integral structure of the ring equipment and the output flange increases its rigidity and lowers misassembly.
Other Model Variety of ZDR Sequence
Far more items,remember to simply click here…
Organization Profile
Delivery
Our Providers
one.Upkeep time & Guarantee: 1 calendar year soon after leaving manufacturing facility.
two.Other service: Which includes modeling assortment information, set up manual, and dilemma capturing manual, etc.
FAQ
Q: What’re your primary goods?
A: We at present create Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, Higher Precision Planetary Gearbox and Precision Cycloidal Gearbox and so forth.. You can check out the specifications for above motors on our web site and you can e-mail us to advocate necessary motors for every your specification way too.
Q: How to choose a ideal motor or gearbox?
A:If you have motor images or drawings to demonstrate us, or you have in depth requirements, this kind of as, voltage, velocity, torque, motor dimensions, working method of the motor, essential life time and sound level and so forth, make sure you do not be reluctant to permit us know, then we can suggest suited motor for each your request accordingly.
Q: Do you have a tailored provider for your standard motors or gearboxes?
A: Yes, we can customize for every your ask for for the voltage, velocity, torque and shaft measurement/shape. If you need to have further wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: Do you have an individual design and style provider for motors?
A: Sure, we would like to design and style motors separately for our customers, but some sort of molds are necessory to be developped which might require actual expense and style charging.
Q: What’s your lead time?
A: Normally talking, our standard regular merchandise will want 15-30days, a bit longer for tailored items. But we are really adaptable on the guide time, it will rely on the certain orders.
Below is a list of our currently offered industrial gearboxes. If you can not locate what you are hunting for, you should contact the manufacturing unit for far more options. At EP, we are constantly developing new merchandise and retrofitting outdated kinds to fulfill buyer specifications.
