Product Description
Details Photographs:
1. Hollow system, which can insert cables within the reducer, so as to realize the area-saving design and style of the unit
two. Created-in system of the primary bearing: the reliability is enhanced and the total expense is decreased
three. Angular speak to ball bearings are put in, so they can assist exterior loads. Since of its substantial rigidity and big second bearing capability, it can be applied to rotating shafts It can decrease the variety of elements required Straightforward set up
4.2-stage reduction mechanism: little vibration, small gD2, the slow revolution velocity of RV equipment, reduced vibration, reduced motor direct junction (enter gear), and inertia
five. Double column assist system: large torsional rigidity Strong effect resistance (500% of rated torque) The crankshaft can be supported by two columns
six. CZPT get in touch with mechanism: excellent starting efficiency Modest put on and long service daily life Small backlash (1arc. Min.) Use of rolling bearings
7. Needle gear mechanism: little backlash (1arc. Min.), robust affect resistance (five hundred% of rated torque), and a lot more simultaneous meshing of RV gear and needle tooth
Advantages:
1. Large torsional rigidity, large torque
two. Devoted technical personnel can be on the go to offer layout remedies
3. Manufacturing unit immediate product sales fine workmanship resilient top quality assurance
4. Item good quality problems have a a single-yr warranty time, can be returned for alternative or mend
Firm profile:
HangZhou CZPT TechCZPT Co., Ltd. was proven in 2014. Based mostly on extended-phrase accumulated expertise in mechanical design and producing, a variety of kinds of harmonic reducers have been developed according to the different demands of clients. The firm is in a phase of speedy advancement. , Gear and staff are constantly growing. Now we have a group of skilled technical and managerial personnel, with advanced tools, complete screening strategies, and solution production and design capabilities. Merchandise design and generation can be carried out according to customer needs, and a selection of large-precision transmission factors this sort of as harmonic reducers and RV reducers have been fashioned the products have been offered in domestic and worldwide(This kind of as United states of america, Germany, Turkey, India) and have been utilized in industrial robots, device resources, medical tools, laser processing, slicing, and dispensing, Brush generating, LED products producing, precision digital tools, and other industries have established a good status.
In the potential, Hongwing will adhere to the objective of collecting talents, keeping close to the industry, and technological innovation, carry ahead the price pursuit in the field of harmonic generate&RV reducers, seek out the frequent development of the business and the culture, and quietly develop alone into a nicely-identified model with independent intellectual residence rights. Top quality supplier in the area of precision transmission”.
SCZPT manufacturing facility:
Our plant has an total campus The variety of workshops is around three hundred No matter whether it truly is from the manufacturing of raw materials and the procurement of raw resources to the inspection of completed items, we’re performing it ourselves. There is a total generation program
HST-I Parameter:
| Rating desk | ||||||||||||||
| Output pace (rpm) | 5 | ten | 15 | 20 | twenty five | 30 | 40 | fifty | 60 | |||||
| Model | Speed ratio code | R Pace ratio |
Output torque (nm) Enter capacity (kw) |
|||||||||||
| Axis rotation | Shell rotation | |||||||||||||
| RV-10C | 27 | 27 | 26 | 136 / .09 |
111 / .sixteen |
ninety eight / .21 |
ninety / .twenty five |
84 / .29 |
eighty / .34 |
seventy three / .41 |
68 / .forty seven |
65 / .54 |
||
| RV-27C | 36.57 | 1,390/38 | 1352/38 | 368 / .26 |
299 / .42 |
265 / .55 |
243 / .sixty eight |
227 / .79 |
215 / .90 |
197 / 1.10 |
184 / 1.29 |
174 / 1.46 |
||
| RV-50C | 32.54 | 1,985/sixty one | 1924/61 | 681 / .48 |
554 / .seventy seven |
490 / 1.03 |
450 / 1.26 |
420 / 1.forty seven |
398 / 1.sixty seven |
366 / 2.04 |
341 / 2.38 |
|||
| RV-100C | 36.75 | 36.seventy five | 35.75 | 1,362 / .95 |
one,107 / 1.55 |
980 / 2.05 |
899 / 2.51 |
841 / 2.ninety four |
796 / 3.33 |
730 / 4.08 |
||||
| RV-200C | 34.86 | 1,499/forty three | 1456/43 | 2,724 / 1.ninety |
2,215 / 3.09 |
1,960 / 4.eleven |
1,803 / 5.04 |
1,686 / 5.88 |
1,597 / 6.69 |
|||||
| RV-320C | 35.61 | 2,778/78 | 2700/seventy eight | 4,361 / 3.04 |
3,538 / 4.ninety four |
3,136 / 6.fifty seven |
two,881 / 8.05 |
two,690 / 9.forty one |
||||||
| RV-500C | 37.34 | three,099/83 | 3016/83 | 6,811 / 4.75 |
five,537 / 7.73 |
four,900 / 10.26 |
4,498 / 12.56 |
|||||||
| Observe: 1. The allowable output speed is affected by duty cycle, load, and ambient temperature. When the allowable output velocity is previously mentioned NS1, you should seek the advice of our organization about the safeguards. 2. Calculate the input potential (kW) by the subsequent system. |
||||||||||||||
| Input capacity (kW)=2π*N*T/60*η/one hundred*ten*ten*10 | N: output velocity (RPM) T: output torque (nm) η = 75: reducer effectiveness (%) |
|||||||||||||
| The enter capacity is the reference worth. three. When using the reducer at a low temperature, the no-load running torque will enhance, so remember to spend focus when choosing the motor. (refer to low-temperature qualities) |
||||||||||||||
| T0 Rated torque (note. 7) |
N0 Rated output pace |
K Rated existence |
TS1 Allowable starting up and halting torque |
TS2 Instantaneous maximum allowable torque |
NS0 Allowable optimum output pace (Observe 1) |
Backlash | Vacant selection MAX. | Angle transfer Error MAX. | Begin performance represents the price | MO1 MO1. Permissible moment (Observe.4) |
MO2 Momstant second Permissible minute |
Wr Allowable radial load (Notice.9) |
I Converted value of inertia minute enter shaft (note. 5) |
Second of inertia I (I = GD2 / 4) regular heart gear |
fat |
| (Nm) | (rpm) | (h) | (Nm) | (Nm) | (r/min) | (arc.sec.) | (arc.min.) | (arc.sec.) | (%) | (Nm) | (Nm) | (N) | (kgm2) | (kgm2) | (kg) |
| ninety eight | 15 | six,000 | 245 | 490 | 80 | 1. | 1. | 70 | 75 | 686 | 1,372 | 5,755 | one.38×10-5 | .678×10-3 | 4.six |
| 264.six | fifteen | 6,000 | 662 | 1,323 | 60 | 1. | 1. | 70 | 80 | 980 | one,960 | six,520 | .550×10-4 | .563×10-three | eight.five |
| 490 | 15 | 6,000 | 1,225 | Bolt fastening 2,450 | 50 | 1. | 1. | 60 | 75 | 1,764 | 3,528 | 9,428 | 1.82×10-4 | 0.363×10-2 | 14.6 |
| Via-gap bolt fastening 1,960 | |||||||||||||||
| 980 | 15 | 6,000 | 2,450 | Bolt fastening 4,900 | 40 | 1. | 1. | 50 | 80 | 2,450 | 4,900 | 11,802 | 0.475×10-3 | 0.953×10-two | 19.5 |
| Through-gap bolt fastening 3,430 | |||||||||||||||
| 1,960 | 15 | 6,000 | 4,900 | Bolt fastening 9,800 | 30 | 1. | 1. | 50 | 80 | 8,820 | 17,640 | 31,455 | 1.39×10-3 | 1.94×10-two | 55.six |
| By means of-hole bolt fastening 7,350 | |||||||||||||||
| 3,136 | fifteen | 6,000 | seven,840 | 15,680 | 25 | 1. | 1. | 50 | 85 | twenty,580 | 39,200 | fifty seven,087 | .518×10-two | .405×10-one | seventy nine.five |
| four,900 | 15 | six,000 | 12,250 | 24,five hundred | 20 | 1. | 1. | fifty | 80 | 34,300 | 78,four hundred | 82,970 | .996×10-2 | one.014×10-one | 154 |
| four. The allowable torque will range in accordance to the thrust load. Remember to verify by the allowable second line diagram. 5. For instant stiffness and torsion stiffness, you should refer to the inclination angle and torsion angle calculation. six. Rated torque refers to the torque price reflecting the rated daily life at rated output speed, not the information showing the higher restrict of load. Make sure you refer to the glossary (p.81) and merchandise selection stream chart (p.82). seven. The previously mentioned specs are attained according to the firm’s evaluation strategy. Please verify that the item meets the use problems of carrying genuine aircraft just before use. 8. When the radial load is in dimension B, make sure you use it inside of the allowable radial load variety. |
|||||||||||||||
Exhibition:
Purposes:
FQA:
Q: What should I give when I choose a gearbox/pace reducer?
A: The ideal way is to supply the motor drawing with parameters. Our engineer will check out and advocate the most ideal gearbox model for your reference.
Or you can also supply the underneath specification as effectively:
one) Type, product, and torque.
2) Ratio or output velocity
3) Doing work problem and relationship technique
four) Top quality and put in device title
5) Input mode and input velocity
six) Motor manufacturer product or flange and motor shaft dimensions
Correct angle gearboxes (worm and planetary gears) are strong and can be employed for 90° turns. An inline reducer (parallel shaft and planetary) is an best matching motor with high enter speeds, or when equipment motor efficiency is important. Make contact with our technical income employees to support decide which transmission answer is ideal for you.
